Stainless steel faucets are a type of faucet and are commonly used So how to maintain and clean maintainless steel faucets? Next, "Xiaoya" will introduce and explain to us, let&# 039; Take a look together

1. Before installing the faucet, it is necessary to flush it with water, clean the sedimentation and impurities in the water pipe, and remove the impurities in the device hole After the completion of the painting project, it is best to wire the faucet clean and cover it with a cloth if it is not necessary for a long time after the installation

2. The faucet should not collude with hard objects as many as possible, and should not leave a trace, glue, etc. on the surface to avoid damaging the sand lines on the surface

3. Do not use excessive force to turn on or off the faucet, just roll it urgently with the flow, specifically do not use the handle as a hand rail to support or use it

4. The faucet should be wired as scheduled to prevent water drops from leaving watermarks after drying

5. The metal hose of the shower head of the bathtub faucet should be brought here to the natural stretching condition, and should not be cooked around the faucet when not necessary Meanwhile, when in use or not necessary, be careful not to form a dead angle at the joint between the host and the valve body to avoid breaking or damaging the host

6. When the water volume decreases after a period of use, please be careful to clean the filter noise

7. Stainless steel faucets are mainly sanded, and the surface of the sanded faucet can be repaired with a cleaning cloth This is different from ordinal copper faucets Even if the faucet is scratched, using a cleaning cloth can still be corrected as new Assuming there are trust spots on the faucet surface caused by other reasons, the same method can be used to correct them

8. Tips for cleaning stainless steel faucets: Squeeze a small amount of tootbaste onto the stainless steel faucet, then quietly clean it with a tootbrush Rinse it with water, use an old stockings that is no longer needed to polish it, and then apply orange peel on the metal surface (because orange peel contains fruit acid to maintain stainless steel jewelry) to make it shine as new

Article source: Kaiping stainless steel faucet http://www.kpjieyuan.com/