How to repair a broken stainless steel countertop water base welding wire faucet

In daily life, some times it is found that the water from the faucet still drips after being elevated, and it drips continuously from the faucet outlet or joint, which is not only caused by a lot of waste, but also some times its noise can cause serious problems In fact, the structure of the faucet is very simple, and the repair of water leakage can be done by one self Generally speaking, the problem of water leakage can be solved by replacing the sealing gas such as the axial gas or triangular sealing gas inside the faucet

How, before proceeding with the renovation, the main switch of the faucet at home needs to be turned off. Regarding the repair of water leakage at the faucet joint, the reason for the leakage is nothing more than the damage to the sealing tape that fastens the faucet (fixing screws) There are more, all you need to do is use a supplier to remove the faucet and roll a new waterproof tape onto the fixed thread The following are the repair steps: first, right the faucet and use a supplier to reverse the need pattern of the faucet to remove it. Turn the threaded hole out and roll it 5-6 times clockwise with wind printed tape on the threaded part

Article source: Guangdong stainless steel faucet http://www.kpjieyuan.com/